For a wide range of products such as floor, decking, doors or furniture elements, manufacturers are seeking to emphasize the natural grain of wood in order to obtain an antique or textured finish. The STR 62L’s brush filaments abrade the softer wood fiber more than the harder ones, revealing the grain of the wood and leaving a surface in relief that can then be stained or filled for ceruse or vast array of unique finishes. With a working width of 600mm, a variable feed speed and working height of up to 300mm the STR 62L is the machine for you. STANDARD EQUIPMENT High resistance rubber belt Variable feed speed adjustment Brush with 32 abrasive inserts, 120 grit and natural fiber support inserts Brush with 32 abrasive inserts, 180 grit and natural fiber support inserts Variable rotational speed of the brush motors with inverter Manual lifting of operating units by means of front handwheels Use and maintenance manual StructuringStructuring refers to surface modification where harder wood grain is raised while softer grains recede. This creates the impression that the wood is weathered, antique, vintage, or repurposed with a look that emphasizes the natural beauty of the wood. Brushing UnitsThis machine consists of two independent brushing units; together they sand and smooth the wood grain and thereby give the structure a softer, vintage appearance. The degree of structuring can be changed by setting the working depth. Different degrees of finishes may also be obtained by changing out the type of brushes. Easily achieve an even structuring and pressure with the adjustable contact rollers at both ends of each brush.
