TempShield CRYO-INDUSTRIAL® Apron - CI-A36 Series | Abrasion-Resistant, CE Cat. III

LabSupplies.com Verified independent store

→

Industrial cryogenic environments — LNG filling stations, bulk liquid nitrogen distribution, cryogenic pipeline systems, and air separation facilities — demand torso protection tha t goes beyond what a laboratory-grade apron can reliably provide. Where the CRYO-APRON® is engineered for research lab use, the TempShield CRYO-INDUSTRIAL® Apron is built for the physical realities of industrial cryogenic work: abrasion-resistant construction that handles repeated contact with metal hardware, rough dewar surfaces, and pipe fittings without degrading; a 24"×54" maximum length that covers from chest to calf for operators working at ground level over open cryogenic vessels; and CE Category III certification under EN 511, EN 388, and EN ISO 13688 that satisfies industrial facility safety management system requirements. Same −196°C thermal rating, same waterproof multi-layered construction, same quick-release buckle closure — heavier-duty exterior fabric for the environments where standard construction wears out too quickly. Available in four lengths (36", 42", 48", 54"), Blue only. Manufactured in the USA by TempShield. Features and Benefits Abrasion-resistant exterior construction — built for industrial surface contact — the outer fabric of the CRYO-INDUSTRIAL® Apron is specifically selected for resistance to the abrasion that comes from repeated contact with metal dewar fittings, LNG station hardware, pipe insulation jacketing, and rough industrial surfaces; standard apron fabrics degrade under these conditions and require premature replacement; the abrasion-resistant construction extends service life in industrial environments Four lengths — 24"×36", 24"×42", 24"×48", 24"×54" — maximum body coverage option — the 54" length (available only in CRYO-INDUSTRIAL®, not CRYO-APRON®) provides chest-to-calf coverage for operators standing over floor-level LNG vessels, large bulk LN2 tanks, and dewar loading docks where cryogenic liquid splash can reach the lower leg; choose length based on the height of your work surface and the extent of potential splash zone Waterproof multi-layered construction rated to −196°C (−320°F) — the waterproof outer layer blocks cryogenic liquid penetration; the insulating layers provide thermal protection against contact cold and cold air exposure; the construction is lightweight relative to its protection level to allow the physical movement required in industrial cryogenic operations — valve turning, hose connection, filling station operation CE Category III certified — EN 511, EN 388, EN ISO 13688 — independently tested and certified at the highest EU PPE classification level; CE Cat. III documentation supports industrial facility LOTO programs, OSHA PPE assessments, and regulatory inspection records; the certification profile matches the CRYO-APRON® while the construction is suited to the harsher industrial use environment Adjustable straps with quick-release buckles — emergency removal in one motion — adjustable neck and waist straps accommodate the range of body sizes in an industrial workforce without per-worker sizing; the quick-release buckles at both closure points allow the apron to be removed immediately in emergency situations, including cryogenic liquid spill events where rapid garment removal is part of the emergency response protocol 2.0 lb construction — heavier-duty build than CRYO-APRON® — the abrasion-resistant fabric adds weight relative to the laboratory CRYO-APRON®; the 2.0 lb weight applies across all four lengths, reflecting the consistent heavier-gauge outer fabric used throughout the CRYO-INDUSTRIAL® line; the weight increase is the direct result of the durability upgrade, not additional insulation USA manufactured — consistent quality across industrial supply lots — TempShield domestic production with ISO-compliant quality management supports consistent performance across quantity purchases for industrial facility PPE programs; suitable for stocking as site PPE inventory in facilities with multiple operators requiring apron protection Specifications Property CI-A36 CI-A42 CI-A48 CI-A54 SKU CI-A36 CI-A42 CI-A48 CI-A54 Brand TempShield Dimensions (W × L) 24" × 36" 24" × 42" 24" × 48" 24" × 54" Temperature Rating −196°C (−320°F) Palm/Exterior Construction Abrasion-resistant outer fabric Waterproof Yes — waterproof multi-layered construction Color Blue only Closure Adjustable neck + waist straps with quick-release buckles Certifications CE Cat. III: EN 511, EN 388, EN ISO 13688 Quantity 1 Each Country of Origin United States Weight 2.0 lb Price $199.00 each Laboratory Applications LNG Filling Station Operations — operating LNG vehicle refueling dispensers, connecting and disconnecting LNG fill hoses, and handling LNG nozzle equipment where repeated contact with metal fittings and rough station hardware would quickly degrade standard apron fabric; the 48" or 54" length covers the lower body during ground-level LNG dispensing operations Bulk Liquid Nitrogen Tank Filling & Distribution — filling bulk stationary LN2 tanks from transport dewars, operating large-volume LN2 manifold systems, and managing LN2 distribution at multi-building research campuses and industrial gas facilities; the abrasion-resistant construction handles the physical contact with dewar hardware inherent to bulk transfer operations Cryogenic Pipeline Maintenance & Valve Operations — servicing vacuum-jacketed transfer lines, operating manual cryogenic ball valves, and performing insulation jacket removal and replacement on cryogenic distribution piping; industrial-duty construction required for the abrasive contact involved in pipeline maintenance tasks Air Separation Plant Operations — LOX, LIN, LAR Handling — liquid oxygen, liquid nitrogen, and liquid argon handling at air separation plants where industrial-grade PPE with CE Cat. III documentation is required by facility safety management systems; pairs with CRYO-LNG™ gloves (B-CLELWP Series) for complete industrial cryogenic hand-and-torso PPE coverage Cryogenic Dewar & Vessel Maintenance — Loading Dock Operations — receiving and dispatching cryogenic dewars at loading docks, securing dewars to transport vehicles, and performing maintenance checks on dewar valves and pressure relief systems; 54" length appropriate for loading dock work where operators lean over dewar tops during valve access Frequently Asked Questions What is the practical difference between CRYO-INDUSTRIAL® Apron and CRYO-APRON® — how do I choose?The key differences are: (1) abrasion-resistant exterior — CRYO-INDUSTRIAL® is built for repeated contact with rough metal and industrial surfaces; CRYO-APRON® is designed for laboratory use where surface contact is less abrasive; (2) 54" length option — only available in CRYO-INDUSTRIAL®; (3) weight — CRYO-INDUSTRIAL® is 2.0 lb vs 1.0–2.0 lb for CRYO-APRON®, reflecting heavier-gauge outer fabric; (4) color — CRYO-INDUSTRIAL® is Blue only; CRYO-APRON® offers Blue and Pink in shorter lengths. If your work is in a research laboratory, the CRYO-APRON® is appropriate. If your work is at an LNG station, bulk supply facility, or industrial gas plant, CRYO-INDUSTRIAL® is the correct choice. Does the CRYO-INDUSTRIAL® Apron pair with CRYO-LNG™ gloves for a matched industrial PPE set?Yes. The CRYO-INDUSTRIAL® Apron and CRYO-LNG™ Gloves (B-CLELWP Series) are the TempShield products designed for the same industrial cryogenic use environment — LNG facilities, bulk LN2 supply, industrial gas operations. Both carry CE and CE/UKCA certifications respectively, both have abrasion-resistant construction, and both are manufactured for the higher physical demands of industrial versus laboratory cryogenic work. For complete industrial cryogenic PPE, add the CRYO-PROTECTION® Face Shield (FSH1001) for face and eye protection. Is the 54" length appropriate for average-height operators, or is it only for tall users?The 54" CRYO-INDUSTRIAL® Apron extends from the chest to approximately mid-calf on an average-height (5'7"–5'9") operator. It is appropriate for any operator working at ground level over open cryogenic vessels where lower-leg exposure is part of the hazard — not just tall users. The 54" length is specifically designed for floor-level filling station operations and loading dock work where shorter aprons leave the lower leg unprotected. For bench-height or waist-height work, the 42" or 48" length typically provides sufficient coverage without the additional fabric of the 54". Can the CRYO-INDUSTRIAL® Apron be worn over FR (flame-resistant) clothing?Yes. The adjustable straps accommodate wearing over FR coveralls, FR lab coats, and other protective underlayers without modification. For facilities where both cryogenic and flame hazards exist — such as LNG operations where ignition risk must also be managed — consult your facility safety management system to confirm that the complete PPE ensemble (FR underlayer + cryogenic apron) meets your specific hazard assessment requirements. TempShield does not rate the CRYO-INDUSTRIAL® Apron as FR clothing; its certification is for cold and mechanical hazard protection only. Quality Assurance TempShield CRYO-INDUSTRIAL® Aprons are manufactured in the United States under ISO-compliant quality management and independently certified CE Category III under EN 511, EN 388, and EN ISO 13688. The abrasion-resistant outer fabric, waterproof construction, and quick-release buckle hardware undergo inspection as part of production quality control. Designed and tested for industrial cryogenic environments where standard laboratory apron construction is insufficient. Inspect the outer fabric surface, buckle function, and strap attachment points before each use in service. As an authorized dealer, we ship directly from USA inventory. Show more