Left-handed Devil-Horn guitar kit with a mahogany body under a quilted maple veneer, a bolt-on mahogany neck, and a rosewood fretboard with trapezoid inlays. Standard 24 3/4" scale with 22 frets, two humbuckers, a Tune-O-Matic bridge with stopbar tailpiece, and chrome hardware. Full Specifications General Orientation: Left-handed Number of Strings: 6 Scale Length: 628mm / 24 3/4" Size: Full Size Build Difficulty: Intermediate Electronics are supplied as a loose wiring harness, and pickup connections require soldering The bolt-on neck joint attaches with a screwdriver, so no gluing or clamping is involved The veneer on the top is thin. Sand it lightly and by hand, or you risk going through it Mahogany is an open-grain wood that benefits from grain filler before finishing Body Material: Mahogany (2-3 piece) Type: Solid Cutaway: Double Body Top Veneer: Quilted Maple Neck Material: Mahogany Joint: Bolt-on Fretboard Material: Rosewood Number of Frets: 22 Inlay Shape: Trapezoid Inlay Material: Plastic Headstock Shape: Blues Classic 3+3 Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-way Switch Hardware Bridge: Tune-O-Matic with Stopbar Tailpiece Hardware Finish: Chrome Pickguard: Black Cavity Covers: Black What's in the Kit Mahogany guitar body with quilted maple veneer (unfinished) Mahogany neck with rosewood fretboard (unfinished) 2x humbucker pickups Wiring harness (2 volume pots, 2 tone pots, 3-way switch) Chrome Tune-O-Matic bridge and stopbar tailpiece 6x left-handed tuning machines Bone nut Black pickguard and cavity covers Neck plate and screws Strings What You'll Need Depending on the finish and build you have in mind, you may need: For assembly: Phillips screwdriver, Allen wrench set, soldering iron and solder for the pickup and harness connections For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat (polyurethane or nitrocellulose lacquer) For setup: String winder, tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related