Devil-Horn Double-Cutaway Electric Guitar Kit, Mahogany Body, Set-In Neck, Rosewood Fretboard, Dual Humbuckers

Guitar Kit World Verified independent store

→

Devil-Horn guitar kit featuring a mahogany body with a symmetric double-cutaway design, a set-in mahogany neck, and a rosewood fretboard with pearl white trapezoid inlays. Standard 24 3/4" scale with 22 frets, two humbuckers, a Tune-O-Matic bridge with stopbar tailpiece, and chrome hardware throughout. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate Electronics are supplied as a loose wiring harness, and pickup connections require soldering The set-in neck joint is fixed, so string height and intonation are dialled in at the bridge and nut rather than by shimming Mahogany is an open-grain wood that benefits from grain filler before finishing Body Material: Mahogany (2-4 piece) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm / 24 3/4" Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Pearl White Headstock Shape: Wave 3+3 Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-way Toggle Switch Wiring: DIY (soldering required) Output Jack: Top jack Hardware Bridge: Tune-O-Matic with Stopbar Tailpiece Tuners: Chrome Sealed Pickguard: Black Knobs: Black Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Mahogany guitar body (unfinished) Mahogany neck with rosewood fretboard (unfinished) 2x humbucker pickups Wiring harness (2 volume pots, 2 tone pots, 3-way toggle switch) Chrome Tune-O-Matic bridge and stopbar tailpiece 6x sealed tuning machines Bone nut Black pickguard and cavity covers Mounting screws Strings What You'll Need Depending on the finish and build you have in mind, you may need: For assembly: Phillips screwdriver, Allen wrench set, soldering iron and solder for the pickup and harness connections For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat (polyurethane or nitrocellulose lacquer) For setup: String winder, tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut. Show more