Devil-Horn guitar kit featuring a mahogany body with a symmetric double-cutaway design, a mahogany neck, and a rosewood fretboard with trapezoid inlays. This kit includes pre-wired electronics with 2 humbuckers and a complete wiring harness - no soldering required. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (1/10) Bolt-on neck joint requires only a screwdriver for attachment Pre-wired electronics eliminate all soldering - just plug in the pickups and connect Mahogany is an open-grain wood that benefits from grain filler before finishing Body Material: Mahogany Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628mm / 24.75" Binding: None Fretboard Material: Rosewood (Engineered) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Pearl White (Engineered) Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Nut Width: 42mm Tuner Holes: 10mm Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-way Toggle Switch Wiring: Pre-wired (plug-and-play) Output Jack: Top jack Hardware Bridge: Tune-o-Matic Tailpiece: Stop Bar Tuners: Sealed Diecast Chrome Pickguard: Black Knobs: Black Speed Knobs Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Mahogany guitar body (unfinished) Mahogany neck with rosewood fretboard (unfinished) Pre-wired electronics harness (2 humbucker pickups, 2 volume pots, 2 tone pots, 3-way toggle switch, output jack - all wired and ready to install) Tune-o-Matic bridge Stop bar tailpiece 6x sealed diecast chrome tuners Bone nut Black pickguard 4x black speed knobs 2x black cavity covers Neck plate and screws Mounting screws Strings Guitar cable Allen wrench What You'll Need Since this is a pre-wired kit, no soldering is required. Depending on the finish and build you have in mind, you may need: For assembly: Phillips screwdriver, Allen wrench set For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat (polyurethane or nitrocellulose lacquer) For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related