UMX® Mixing White (Pantone® Mixing Base) is the mixing base of our UMX (Ultimate Mixing System) — combine it with the 18 UMX mixing colors to hit lighter tints and complete every Pantone® (PMS) recipe by weight. Pantone®-certified, it cures at 320–350°F. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey. Mixing base. Available in multiple sizes. Heat cure. Made in the USA. Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing. Features & benefits The mixing base — lightens tints and completes UMX Pantone® recipes Pantone®-certified system — verified under D50 lighting Mix by weight — free software at umxsystem.com Consistent, repeatable color CPSIA-compliant & phthalate-free — made in the USA Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job. How the system works Pull your Pantone® (PMS) recipe from the free UMX software. Weigh the mixing white with the 18 UMX mixing colors per the recipe. Print, cure, and get a verified, repeatable spot color. Printing & curing Mesh: 110–305 depending on the print Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer Flash: 240–260°F between colors Cure: curing is a time-and-temperature process — bring the full ink film to 320–350°F (160–177°C); confirm with a temp gun or donut probe, not dryer air temp Recommended companion products Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first). Quick Flash Reducer — thins for easier printing. Soft Hand Base — softer hand feel. UMX® Pantone® Mixing Colors / UMX® Mixing Kit. Cleanup: OPTI Wash 125 and OPTI Spot 303. How close are we to your Pantone? See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target. Safety, PPE & storage Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink. Print with adequate ventilation; vent your dryer. Always stir before use. Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. In high heat expect container expansion — open carefully. Do not freeze. Refer to the Safety Data Sheet before use. Compliance CPSIA compliant (16 CFR 1303
Related
Related